Mold is an unpleasant phenomenon in your own four walls, which can not only be seen in the bathroom and not only on the walls, but also on the windows. If you recognize mold in your home, you should act as quickly as possible and remove it, because it is not only unsightly and annoying but also dangerous to your health. Today we give you a few important tips and useful ideas on how to remove the mold on the window. And with home remedies!
Don’t allow mold on the window
Mold on the window – what is it and what are the causes?
At the beginning, however, it is important to devote a few lines to the question of why mold actually develops? These are actually dark, black spots. The most common cause of mold growth is excessive humidity.
Cooking, showering and drying laundry indoors creates a large amount of water vapour. However, incorrect ventilation or poor insulation of the building could also lead to condensation forming and, accordingly, mould.
This phenomenon is particularly typical of the cold season. The reason: the combination of moisture and heat. Regardless of whether the mold has formed on the window itself, on the window frame or on the window seal, you must act in good time. Breathing in mold spores for a long time can cause health problems. Mold also penetrates deeper into the material over time and it becomes increasingly difficult to remove it. If, for example, wooden frames are affected by mold, you simply have to replace them completely. A window frame made of wood is usually much more damaged by mold than a window frame made of plastic.
Mold growth can vary in degree
Useful tips for mold removal
It is very important to note that the mold spores are also whirled up in the air during cleaning work. It is therefore possible that you yourself inhale the spores. It is therefore advisable to wear a face mask and protective clothing in addition to gloves!
You must also close all doors and remove food from the room. Other people, especially children, should also leave the room. It is best to shower after removing the mold. So you do not transmit spores to other people.
Take measures against the mold on the window so that the mold does not continue to spread
What home remedies help fight mold?
Of course, it depends on the strength and extent of the means to be used in the event of a mold infestation. However, if you generally do not want to use special cleaners in the fight against mold, you can use various home remedies. Nevertheless, one must be aware that such agents are more suitable for superficial mold removal. It is often necessary for a professional to determine how deep the mold has penetrated the material. But let’s see which home remedies are effective against mold on the window.
Even the material of the window is damaged by mold
If you use alcohol to remove the mold, then the mold will dry up. For the purpose you need a 70-80 percent alcohol. You have to remove the mold with a cloth soaked in alcohol. A toothbrush could be very helpful for you to get rid of the mold in small corners. Be careful not to inhale the fumes though, as this could be dangerous for you! Also, be careful to avoid a fire hazard! After all, alcohol is flammable! For example, even candles should not be around if you remove the mold with alcohol. It is also advisable to ventilate the room well after removing mold with alcohol.
Vinegar has proven to be a real all-rounder in the household. It has no toxic ingredients and still proves to be a very effective cleaning agent. Vinegar’s low pH is why it’s so effective at fighting mold. Soak a rag in commercially available vinegar concentrate and wipe off the affected areas. However, the vinegar can irritate the respiratory tract, so remember to use proper protection when removing mold!
Keep mold at bay using effective home remedies!
A lemon cleanser has the same effect as the vinegar. However, this is completely unsuitable for mineral substrates.
A solution containing at least 5 percent hydrogen peroxide is also very effective when trying to clean window mold. However, an important requirement when using this agent is that the substrate is completely dry during treatment.
You could also use water to remove mold, but only if the surfaces are smooth and non-absorbent. For example, if you use pure water to clean wooden frames, even more mold will form! Water, on the other hand, is very good for removing mold from plastic window frames.
We hope that you have already learned how to effectively remove mold on the window using only household remedies instead of chemicals! But just don’t let mold grow in your home by properly heating and ventilating your home and have a healthy living atmosphere at home!
The larger the affected area, the more dangerous it becomes for the health of the residents
You need mouth and eye protection when removing mold!